Пересказ 9 предложений unit 6 read the text, please. heating effect of an electric current the production of heat is perhaps the most familiar among the princi pal effects of an electric current, either because of its development in the filaments of the electric lamps or, maybe, because of the possible danger from overloaded wires. a metal wire carrying a current will almost always be at a higher temperature than the temperature of that very wire unless it carries any cufrent. it means that an electric current passing along a wire ill heat that wire and may even cause it to become red-hot. thus the current can be detected by the heat developed provided it flows along the wire. the heat produced per second depends both upon the resistance of the conductor and upon the amount of current carried through it. as a matter of fact, if some current flowed along a thin wire nd then the same amount of current were sent through a thicker one, a different amount of heat would be developed in both wires. when the current is sent through the wire which is too thin to carry it freely, then more electric energy will be converted into heat than in the case of a thick wire conducting a small current. imagine that a small current is flowing along a thick metal conductor. under such conditions the only way to discover whether heat has been developed is to make use of a sensitive thermometer because the heating is too negligible to be detected by other means if, however, the conductor were very thin while the current were large the amount of generated heat would be much greater than that roduced in the thick wire. in fact, one could easily feel it. thus the thinner the wire, the greater the developed heat. on the contrary, the larger the wire, the more negligible is the heat produced needless to say, such heat is greatly desirable at times but at other times it must be removed or, at least, decreased as it represents a waste of useful energy. in case heat is developed in a transmission line, a generator or a motor, it is but a waste of electric energy and overheating is most undesirable and even dangerous. this waste is generally called «heat loss» for it serves no useful purposes and does decrease efficiency. nevertheless, one should not forget that the heat developed in the electric circuit is of great practical importance for heating, lighting and other purposes. owing to it people are provided with a large number of appliances, such as: electric mps that light homes, factories, electrical heaters that are widely used to meet industrial requirements, and some other necessary and irreplaceable things which have been serving mankind for so many years. in short, many of the invaluable electrical appliances without which life would seem strange and impossible at present can be utilized only because they transform electric energy into heat. the production of heat by an electric current is called heating effect. one might also name its light effect provided the heat in the conductor is great enough to make it white-hot, so that it gives off light as well as heat. take the filament of an electric lamp as an example, it is known to glow because of heat. by the way, were people able to look inside a hot electric iron, they should see that its wires were glowing too. similar statement could be applied as well to almost any electric heating device. all of them give off a little light and a lot of heat.